Stacking Pi plates MacGyver style

20130504-175801.jpg

Using the stacking SIP connectors for Arduino’s works enough to get me by stacking these boards. One thing to note, this isn’t soldered in place, it actually needs a temporary spacer while soldering it so that the depth of the connector to the raspberry pi matched the original connector. (put the connector in place without soldering then try to plug the plate into the raspberry port and you’ll see what I mean)

 

EDIT: 5/8/2013: http://www.adafruit.com/products/1112  … don’t know how this slipped by.. easy to buy and cheap…problem solved.

Fresh Pi in the mail

Newly arrived in the mail today! I received my first Raspberry Pi as I feel immediate guilt over the Tindie PIC boards I have waiting to be populated and explored. I look forward to loading up the OS and finding some to plug this into for video… my TV isn’t very practical for hacking away at hardware. I appreciated the low cost of the shipping from Adafruit but the items shipped in a soft pack and the box got somewhat crushed as view below. Maybe it’s a little retentive but I wish they would have shipped it in a small box. Nothing was functionally damaged of course so I can’t complain to much. I’ll spend the evening putting together the LCD interface it, Proto Plate, a little level converter for my BMP085 breakout board (Sparkfun) and The Pi Cobbler kit.

 

The Raspberry Pi Model B with 9V to compare size.
The Raspberry Pi Model B with 9V to compare size.

 

Unpacked from Adafruit, the Raspberry Pi and peripherals.
Unpacked from Adafruit, the Raspberry Pi and peripherals.

Product links:

Proto Pi: http://adafru.it/801 4 bit level conv:  http://adafru.it/757  cobbler kit:  http://adafru.it/914 16×2 LCD display: http://adafru.it/181

 

 

OP Amps

I remember my first electronics book was a project book with assorted transistor and tube circuits. I steered clear of OP Amps through my younger twenties even.

I recommend some day you’re sitting around at your bench wondering what to make or fix next… day some time to refresh your OP Amp skills.. I could never match W2AEW’s Op Amp video, a great refresher for those who forgot how much we forgot and the newbie!

 

Talos the Sumo Roomba

My sumo roomba is running around but has a lot of tweaking yet to be completed.

To do list:

Fix the IR sensor interface, it’s flaky.

Add bumper sensors & code to turn into them.

I probably put too much work into measurements and sensors monitoring. I have a tablet that I can monitor most items in case I want to record anything. It’s bluetooth (the only use for the bluetooth module). You’ll note it runs on two PICs, one for drive and offense/defense, the other for monitoring, communication, and subsystem work. The battery was bad so I dropped a 12V 1.2AH SLA into the case.. not the best fix but it works fine.

PIC MCU board. This replaces the old board and all sensors and motor control is done on this board.
PIC MCU board. This replaces the old board and all sensors and motor control is done on this board.
Bottom view of Talos the Sumo Roomba.
Bottom view of Talos the Sumo Roomba.

50 uses for that Mylar sheet you carry around

50 uses for an Emergency Blanket you carry around in your emergency stuff-sack…

http://seattlebackpackersmagazine.com/50-uses-for-an-emergency-blanket/

A clever little article found on Seattle Backpacker Magazine’s site.

22. Improvised survival lingerie – be creative.

23. Use with a rubber band to improvise a condom.

… I’m going to have to field test #22 with my wife next time I get her out on the trails overnight.